| Age | Commit message (Collapse) | Author |
|
sys/dev/usb/usbdevs: revision 1.800
Add a new APC UPS device id.
|
|
sys/dev/usb/usbdevs: revision 1.801
Add the Microchip PICkit3 programmer
|
|
sys/dev/usb/usbdevs: revision 1.799
add two more models of cyperpower UPS.
|
|
sys/dev/usb/usbdevs: revision 1.798
add Edimax N150 adapter; tested on my PBP
|
|
sys/dev/usb/usbdevs: revision 1.793
correct usb device id for BELKIN F5D7050E
matches freebsd / openbsd (sources of urtw driver), various online
sources
PR kern/56056
|
|
sys/dev/usb/if_urtwn.c: revision 1.89,1.90
sys/dev/usb/usbdevs: revision 1.788,1.789
urtwn(4): add TPLINK WN821N to the list of USB device ids
reported by kfmut on the unitedbsd forums.
add another TPLINK RTL8192EU variant
to avoid confusion use TP-Link's names for these variants, matching
FreeBSD
|
|
sys/dev/usb/usbdevs: revision 1.782
usbdevs: more Intel Integrated Rate Matching Hub IDs
|
|
sys/dev/usb/usbdevs: revision 1.778
sys/dev/usb/if_urtwn.c: revision 1.85
Add D-Link DWA-121 rev B1 to list of supported devices
From Miguel Landaeta in kern/55140
|
|
share/man/man4/uxrcom.4: revision 1.1
distrib/sets/lists/man/mi: revision 1.1687
share/man/man4/uxrcom.4: revision 1.2
share/man/man4/ucom.4: revision 1.28
sys/dev/usb/uxrcom.c: revision 1.1
sys/dev/usb/umodem.c: revision 1.74
sys/dev/usb/umodem_common.c: revision 1.33
sys/dev/usb/ukyopon.c: revision 1.26
sys/dev/usb/files.usb: revision 1.173
share/man/man4/Makefile: revision 1.704
sys/dev/usb/usbdevs: revision 1.781
sys/dev/usb/usbdevices.config: revision 1.38
Add uxrcom driver for Exar XR21V141x USB serial adapters. Based in part
on the OpenBSD single-port XR21V1410 uxrcom driver, but adds support
for multi-port chipsets and uses the common umodem framework instead of
being a standalone driver.
Thanks to skrll@ for much USB clue and mrg@ for financing the
development of this driver.
Add NetBSD CVS tag.
|
|
sys/dev/usb/usbdevs: revision 1.776
sys/dev/usb/u3g.c: revision 1.40
sys/dev/usb/umodeswitch.c: revision 1.5
Add UE version of D-Link DWM-157
-
Add support for D-Link DWM-157 3G USB modem
|
|
sys/dev/ic/anx_dp.c: revision 1.2
sys/arch/evbarm/conf/GENERIC64: revision 1.126
sys/dev/ic/anx_dp.h: revision 1.1
sys/arch/evbarm/conf/GENERIC64: revision 1.128
sys/dev/ic/anx_dp.h: revision 1.2
sys/dev/fdt/dwcmmc_fdt.c: revision 1.9
sys/dev/i2c/cwfg.c: revision 1.1
sys/conf/files: revision 1.1247
sys/dev/fdt/pwm_backlight.c: revision 1.5
sys/dev/fdt/pwm_backlight.c: revision 1.6
sys/arch/arm/rockchip/rk3399_cru.c: revision 1.14
sys/arch/arm/rockchip/rk3399_cru.c: revision 1.15
sys/arch/arm/rockchip/rk3399_cru.c: revision 1.16
sys/arch/arm/rockchip/rk3399_cru.c: revision 1.17
sys/dev/ic/dwc_mmc.c: revision 1.20
sys/arch/arm/rockchip/rk3399_cru.c: revision 1.18
sys/arch/arm/rockchip/rk3399_cru.c: revision 1.19
sys/dev/usb/usbdevs: revision 1.775
sys/arch/arm/rockchip/rk_dwhdmi.c: revision 1.4
sys/dev/fdt/simple_amplifier.c: revision 1.1
sys/dev/i2c/files.i2c: revision 1.105
sys/arch/evbarm/conf/GENERIC64: revision 1.117
sys/arch/evbarm/conf/GENERIC64: revision 1.118
sys/dev/i2c/files.i2c: revision 1.107
sys/dev/fdt/files.fdt: revision 1.49
sys/arch/arm/rockchip/rk_anxdp.c: revision 1.1
sys/dev/ic/dwc_mmc_var.h: revision 1.9
sys/dev/i2c/rkpmic.c: revision 1.4
sys/arch/arm/rockchip/rk_anxdp.c: revision 1.2
sys/dev/i2c/rkpmic.c: revision 1.5
sys/dev/i2c/rkpmic.c: revision 1.6
sys/arch/arm/rockchip/rk_vop.c: revision 1.4
sys/arch/arm/rockchip/rk_vop.c: revision 1.5
sys/dev/i2c/rkpmic.c: revision 1.8
sys/arch/arm/dts/rk3399-pinebook-pro.dts: revision 1.1
sys/dev/usb/ums.c: revision 1.96 (via patch)
sys/arch/arm/rockchip/rk_pwm.c: revision 1.3
sys/arch/arm/dts/rk3399-pinebook-pro.dts: revision 1.2
sys/dev/i2c/es8316ac.c: revision 1.1
sys/dev/fdt/dwcmmc_fdt.c: revision 1.10
sys/dev/i2c/es8316ac.c: revision 1.2
sys/dev/fdt/fdt_panel.c: revision 1.1
sys/dev/ic/dwc_mmc.c: revision 1.18
sys/dev/fdt/fdt_panel.c: revision 1.2
sys/dev/ic/dwc_mmc.c: revision 1.19
sys/arch/arm/dts/rk3399-rockpro64.dts: revision 1.10
sys/dev/fdt/fdt_port.c: revision 1.5
sys/dev/ic/dwc_mmc_var.h: revision 1.10
sys/dev/fdt/fdt_port.c: revision 1.6
sys/arch/evbarm/conf/GENERIC64: revision 1.122
sys/dev/ic/dwc_mmc_var.h: revision 1.11
sys/dev/fdt/files.fdt: revision 1.50
sys/arch/evbarm/conf/GENERIC64: revision 1.123
sys/arch/arm/rockchip/rk_i2s.c: revision 1.2
sys/arch/arm/rockchip/files.rockchip: revision 1.23
sys/arch/evbarm/conf/GENERIC64: revision 1.124
sys/dev/ic/anx_dp.c: revision 1.1
rkpmic: add RTC support; register w/ todr(9)
rkpmic: correct delay
Add support for SDIO interrupts.
fix copy/paste error in mux_pll_src_cpll_gpll_ppll_parents[]
add RK3399 eDP clocks
add RK3399 DisplayPort clocks
style fix/KNF
rk3399_cru: implement dclk_vop0_frac and dclk_vop1_frac
Move drm_encoder from rkvop(4) to the SoC-layer output pipe drivers (rk_dwhdmi).
rkvop: set stride using virtual framebuffer width instead of display mode
rk3399_cru: Reparent dclk_vop[01] to gpll via dclk_vop[01]_frac.
The previous source of dclk_vop[01] was vpll via dclk_vop[01]_div.
vpll is apparently used directly as a pixel clock source for the
HDMI PHY, and we don't want the other VOP's dclk changing out from
under it because we can't handle finding a replacement clock source
with the right rate yet.
gpll happens to run at 594MHz, which works well as a basis for pixel
clocks.
Linux suggests that the source clock of the fractional divider needs
to be more than twenty times greater than the resulting clock (or some
intermediate clock?) for output stability. This may not be the case
with 594MHz and the common pixel clocks I see used by displays in my
area of the wild, but it works for now.
add Analogix DisplayPort core driver
add Rockchip (RK3399) glue for Analogix DisplayPort core
add anxdp(4)
Add another panel@fdt driver, this time for DRM-style panels.
To do: migrate away from other panel driver.
enable panel at fdt drivers
paper over the rkpwm get_conf function that otherwise doesn't seem to
let things work
add template bits for optional eDP panel on RockPro64
Abort panel driver attach if required regulator is missing.
Add clk provider
Add Pinebook Pro dts, from Manjaro Linux.
https://gitlab.manjaro.org/tsys/linux-pinebook-pro/blob/877ca0e7283596f37845de50dc36bff5b88b91e1/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
+ rk3399-pinebook-pro.dts
Attach mmcpwrseq resource earlier
dwcmmc improvements:
- Use mmcpwrseq resources if available
- Only set 4- or 8-bit mode if specified in the dt properties
- Add quirk for implementations with inverted power enable logic
- Support switching signal voltage between 1.8V and 3.3V
- Fix a clock divider issue on Rockchip SoCs
Fix performance regression with previous
Quiet chatty printfs
No need to print all supported levels at attach, print the range and total number of steps
Disable SPI for now (rkspi driver hangs at boot)
Add driver for simple-audio-amplifier binding
Add driver for Everest Semi ES8316 Low Power Audio CODEC
add es8316, simpleamp
Avoid sleeping while the audio intr lock is held.
If the rockchip,system-power-controller property is present, try to power off with the PMIC
Add HAILUCK keyboard (product 1e)
Add a quirk for the HAILUCK USB keyboard / touchpad device with product 1e.
The keyboard does not function properly unless the touchpad's intr endpoint
is active.
Add driver for CellWise CW2015 Fuel Gauge IC.
add cwfg
Emit PMFE_DISPLAY_{ON,OFF} events in response to DPMS requests.
If the backlight node does not have an enable gpio, set the lowest duty
cycle to turn the display off instead.
Attach psci as early as possible. This allows other power controllers to
register their own poweroff / reset callbacks with a higher preference.
Add 2000 MHz to available armclkb rates
Remove debug printfs
|
|
sys/dev/usb/usbdevs: revision 1.771
sys/dev/usb/usbdevs: revision 1.772
sys/dev/usb/usbdevs: revision 1.773
add 3 devices for upl(4) host-to-host networking:
- belkin F5U258
- national instruments USB host to host adapter
- prolific id 25a1
-
add two kue(4) adapters:
ACTIONTEC KL5KUSB101 USB Ethernet adapter
ALLIEDTELESYN AT-USB10 USB Ethernet Adapter
-
add MosChip MCS7730 and Sitecom Europe LN030 ethernet adapters.
|
|
|
|
|
|
|
|
|
|
Modified patches from Julian in PR kern/44634
|
|
|
|
|
|
|
|
|
|
|
|
|
|
WiFi device.
|
|
|
|
|
|
|
|
- Add NetIndex RT-WJ02 and UX312NC.
- Add Siemens HC28
- Add ZTE MF112, MF119, MF190, MF228 modem / Softbank 004Z
|
|
(it's listed in usb.if). Same as OpenBSD.
- Add Fujitsu Component Smart Power Strip FX-5204PS, Base Station FX-5251WB
and Virtual Eth Device From OpenBSD.
- Vendor ID 0x1004 is not Qualcomm but LG Electronics (it's listed in usb.if).
- Add Cinterion
- Rename 4GSYSTEMS to LONGCHEER. Same as other OSes.
- Add Longcheer WM66 HSDPA, Emobile D21LC Mass only mode, Emobile D21LC,
IIJmobile 510FU and IIJmobile 510FU Mass only mode.
- Add Sierra Wireless C01SW.
- Add SMSC USB 2.0 7-Port Hub.
- Add ZTE MF633 USUPA USB modem and USB MSM installer.
|
|
|
|
(comment change only)
|
|
|
|
|
|
This syncs some vendor changes from FreeBSD (r334649). Prefer
longer "canonical" names where the names differed.
ok leot@
|
|
ubt0: Apple Computer (0x5ac) product 8203 (0x8203), rev 1.10/5.26, addr 2
|
|
|
|
|
|
|
|
|
|
|
|
wireless devices.
|
|
|
|
|
|
|
|
While here, add a Ralink that I had uncommitted and fix some caps hex to
small for consistency
|
|
|
|
(and possibly others)
|
|
|
|
Elitebook 2170p. Note the device will not do much without its
proprietary firmware loaded.
|
|
|