| Age | Commit message (Collapse) | Author |
|
Although tzcode still works with C89, bugs found in recent routine
maintenance indicate that bitrot has set in and that in practice
C89 is no longer used to build tzcode. As it is a maintenance
burden, support for C89 is planned to be removed soon. Instead,
please use compilers compatible with C99, C11, C17, or C23.
timegm, which tzcode implemented in 1989, will finally be
standardized 34 years later as part of C23, so timegm is now
supported even if STD_INSPIRED is not defined.
Fix bug in zdump's tzalloc emulation on hosts that lack tm_zone.
(Problem reported by Đoàn Trần Công Danh.)
Fix bug in zic on hosts where malloc(0) yields NULL on success.
(Problem reported by Tim McBrayer for AIX 6.1.)
Fix zic configuration to avoid linkage failures on some platforms.
(Problems reported by Gilmore Davidson and Igor Ivanov.)
Work around MS-Windows nmake incompatibility with POSIX.
(Problem reported by Manuela Friedrich.)
Port mktime and strftime to debugging platforms where accessing
uninitialized data has undefined behavior (strftime problem
reported by Robert Elz).
Check more carefully for unlikely integer overflows, preferring
C23 <stdckdint.h> to overflow checking by hand, as the latter has
had obscure bugs.
|
|
Changes to code
zic now supports links to links regardless of input line order.
For example, if Australia/Sydney is a Zone, the lines
Link Australia/Canberra Australia/ACT
Link Australia/Sydney Australia/Canberra
now work correctly, even though the shell commands
ln Australia/Canberra Australia/ACT
ln Australia/Sydney Australia/Canberra
would fail because the first command attempts to use a link
Australia/Canberra that does not exist until after the second
command is executed. Previously, zic had unspecified behavior if
a Link line's target was another link, and zic often misbehaved if
a Link line's target was a later Link line.
Fix line number in zic's diagnostic for a link to a link.
Fix a bug that caused localtime to mishandle timestamps starting
in the year 2438 when reading data generated by 'zic -b fat' when
distant-future DST transitions occur at times given in standard
time or in UT, not the usual case of local time. This occurs when
the corresponding .zi Rule lines specify DST transitions with TO
columns of 'max' and AT columns that end in 's' or 'u'. The
number 2438 comes from the 32-bit limit in the year 2038, plus the
400-year Gregorian cycle. (Problem reported by Bradley White.)
On glibc 2.34 and later, which optionally supports 64-bit time_t
on platforms like x86 where time_t was traditionally 32 bits,
default time_t to 64 instead of 32 bits. This lets functions like
localtime support timestamps after the year 2038, and fixes
year-2038 problems in zic when accessing files dated after 2038.
To continue to limit time_t to 32 bits on these platforms, use
"make CFLAGS='-D_TIME_BITS=32'".
In C code, do not enable large-file support on platforms like AIX
and macOS that no longer need it now that tzcode does not use
off_t or related functions like 'stat'. Large-file support is
still enabled by default on GNU/Linux, as it is needed for 64-bit
time_t support.
In C code, prefer C23 keywords to pre-C23 macros for alignof,
bool, false, and true. Also, use the following C23 features if
available: __has_include, unreachable.
zic no longer works around Qt bug 53071, as the relevant Qt
releases have been out of support since 2019. This change affects
only fat TZif files, as thin files never had the workaround.
zdump no longer modifies the environ vector when compiled on
platforms lacking tm_zone or when compiled with -DUSE_LTZ=0.
This avoid undefined behavior on POSIX platforms.
|
|
|
|
Work around a bug in onetrueawk that broke commands like
'make traditional_tarballs' on FreeBSD, macOS, etc.
(Problem reported by Deborah Goldsmith.)
Add code to tzselect that uses experimental structured comments in
zone1970.tab to clarify whether Zones like Africa/Abidjan and
Europe/Istanbul cross continent or ocean boundaries.
(Inspired by a problem reported by Peter Krefting.)
Fix bug with 'zic -d /a/b/c' when /a is unwritable but the
directory /a/b already exists.
Remove zoneinfo2tdf.pl, as it was unused and triggered false
malware alarms on some email servers.
|
|
zic has a new option '-R @N' to output explicit transitions < N.
(Need suggested by Almaz Mingaleev.)
'zic -r @N' no longer outputs bad data when N < first transition.
(Problem introduced in 2021d and reported by Peter Krefting.)
zic now checks its input for NUL bytes and unterminated lines, and
now supports input line lengths up to 2048 (not 512) bytes.
gmtime and related code now use the abbreviation "UTC" not "GMT".
POSIX is being revised to require this.
When tzset and related functions set vestigial static variables
like tzname, they now prefer specified timestamps to unspecified ones.
(Problem reported by Almaz Mingaleev.)
zic no longer complains "can't determine time zone abbreviation to
use just after until time" when a transition to a new standard
time occurs simultanously with the first DST fallback transition.
|
|
Changes to code
Fix bug when mktime gets confused by truncated TZif files with
unspecified local time. (Problem reported by Almaz Mingaleev.)
Fix bug when 32-bit time_t code reads malformed 64-bit TZif data.
(Problem reported by Christos Zoulas.)
When reading a version 2 or later TZif file, the TZif reader now
validates the version 1 header and data block only enough to skip
over them, as recommended by RFC 8536 section 4. Also, the TZif
reader no longer mistakenly attempts to parse a version 1 TZIf
file header as a TZ string.
zdump -v now outputs "(localtime failed)" and "(gmtime failed)"
when local time and UT cannot be determined for a timestamp.
|
|
Release 2021e - 2021-10-21 18:41:00 -0700
Changes to code
none
Release 2021d - 2021-10-15 13:48:18 -0700
Changes to code
'zic -r' now uses "-00" time zone abbreviations for intervals
with UT offsets that are unspecified due to -r truncation.
This implements a change in draft Internet RFC 8536bis.
Release 2021c - 2021-10-01 14:21:49 -0700
Changes to code
Fix a bug in 'zic -b fat' that caused old timestamps to be
mishandled in 32-bit-only readers (problem reported by Daniel
Fischer).
Changes to documentation
Distribute the SECURITY file (problem reported by Andreas Radke).
Release 2021b - 2021-09-24 16:23:00 -0700
Changes to maintenance procedure
The new file SECURITY covers how to report security-related bugs.
Several backward-compatibility links have been moved to the
'backward' file. These links, which range from Africa/Addis_Ababa
to Pacific/Saipan, are only for compatibility with now-obsolete
guidelines suggesting an entry for every ISO 3166 code.
The intercontinental convenience links Asia/Istanbul and
Europe/Nicosia have also been moved to 'backward'.
Changes to code
zic now creates each output file or link atomically,
possibly by creating a temporary file and then renaming it.
This avoids races where a TZ setting would temporarily stop
working while zic was installing a replacement file or link.
zic -L no longer omits the POSIX TZ string in its output.
Starting with 2020a, zic -L truncated its output according to the
"Expires" directive or "#expires" comment in the leapseconds file.
The resulting TZif files omitted daylight saving transitions after
the leap second table expired, which led to far less-accurate
predictions of times after the expiry. Although future timestamps
cannot be converted accurately in the presence of leap seconds, it
is more accurate to convert near-future timestamps with a few
seconds error than with an hour error, so zic -L no longer
truncates output in this way.
Instead, when zic -L is given the "Expires" directive, it now
outputs the expiration by appending a no-change entry to the leap
second table. Although this should work well with most TZif
readers, it does not conform to Internet RFC 8536 and some pickier
clients (including tzdb 2017c through 2021a) reject it, so
"Expires" directives are currently disabled by default. To enable
them, set the EXPIRES_LINE Makefile variable. If a TZif file uses
this new feature it is marked with a new TZif version number 4,
a format intended to be documented in a successor to RFC 8536.
zic -L LEAPFILE -r @LO no longer generates an invalid TZif file
that omits leap second information for the range LO..B when LO
falls between two leap seconds A and B. Instead, it generates a
TZif version 4 file that represents the previously-missing
information.
The TZif reader now allows the leap second table to begin with a
correction other than -1 or +1, and to contain adjacent
transitions with equal corrections. This supports TZif version 4.
The TZif reader now lets leap seconds occur less than 28 days
apart. This supports possible future TZif extensions.
Fix bug that caused 'localtime' etc. to crash when TZ was
set to a all-year DST string like "EST5EDT4,0/0,J365/25" that does
not conform to POSIX but does conform to Internet RFC 8536.
Fix another bug that caused 'localtime' etc. to crash when TZ was
set to a POSIX-conforming but unusual TZ string like
"EST5EDT4,0/0,J365/0", where almost all the year is DST.
Fix yet another bug that caused 'localtime' etc. to mishandle slim
TZif files containing leap seconds after the last explicit
transition in the table, or when handling far-future timestamps
in slim TZif files lacking leap seconds.
Fix localtime misbehavior involving positive leap seconds.
This change affects only behavior for "right" system time,
which contains leap seconds, and only if the UT offset is
not a multiple of 60 seconds when a positive leap second occurs.
(No such timezone exists in tzdb, luckily.) Without the fix,
the timestamp was ambiguous during a positive leap second.
With the fix, any seconds occurring after a positive leap second
and within the same localtime minute are counted through 60, not
through 59; their UT offset (tm_gmtoff) is the same as before.
Here is how the fix affects timestamps in a timezone with UT
offset +01:23:45 (5025 seconds) and with a positive leap second at
1972-06-30 23:59:60 UTC (78796800):
time_t without the fix with the fix
78796800 1972-07-01 01:23:45 1972-07-01 01:23:45 (leap second)
78796801 1972-07-01 01:23:45 1972-07-01 01:23:46
...
78796815 1972-07-01 01:23:59 1972-07-01 01:23:60
78796816 1972-07-01 01:24:00 1972-07-01 01:24:00
Fix an unlikely bug that caused 'localtime' etc. to misbehave if
civil time changes a few seconds before time_t wraps around, when
leap seconds are enabled.
Fix bug in zic -r; in some cases, the dummy time type after the
last time transition disagreed with the TZ string, contrary to
Internet RFC 8563 section 3.3.
Fix a bug with 'zic -r @X' when X is a negative leap second that
has a nonnegative correction. Without the fix, the output file
was truncated so that X appeared to be a positive leap second.
Fix a similar, even-less-likely bug when truncating at a positive
leap second that has a nonpositive correction.
zic -r now reports an error if given rolling leap seconds, as this
usage has never generally worked and is evidently unused.
zic now generates a POSIX-conforming TZ string for TZif files
where all-year DST is predicted for the indefinite future.
For example, for all-year Eastern Daylight Time, zic now generates
"XXX3EDT4,0/0,J365/23" where it previously generated
"EST5EDT,0/0,J365/25" or "". (Thanks to Michael Deckers for
noting the possibility of POSIX conformance.)
zic.c no longer requires sys/wait.h (thanks to spazmodius for
noting it wasn't needed).
When reading slim TZif files, zdump no longer mishandles leap
seconds on the rare platforms where time_t counts leap seconds,
fixing a bug introduced in 2014g.
zdump -v now outputs timestamps at boundaries of what localtime
and gmtime can represent, instead of the less-useful timestamps
one day after the minimum and one day before the maximum.
(Thanks to Arthur David Olson for prototype code, and to Manuela
Friedrich for debugging help.)
zdump's -c and -t options are now consistently inclusive for the
lower time bound and exclusive for the upper. Formerly they were
inconsistent. (Confusion noted by Martin Burnicki.)
Changes to build procedure
You can now compile with -DHAVE_MALLOC_ERRNO=0 to port to
non-POSIX hosts where malloc doesn't set errno.
(Problem reported by Jan Engelhardt.)
Changes to documentation
tzfile.5 better matches a draft successor to RFC 8536
<https://datatracker.ietf.org/doc/draft-murchison-rfc8536bis/01/>.
|
|
- No comments in the changelog about the code changes.
|
|
|
|
and we were "slim" already)
Support for zic's long-obsolete '-y YEARISTYPE' option has been
removed and, with it, so has support for the TYPE field in Rule
lines, which is now reserved for compatibility with earlier zic.
These features were previously deprecated in release 2015f.
(Thanks to Tim Parenti.)
zic now defaults to '-b slim' instead of to '-b fat'.
zic's new '-l -' and '-p -' options uninstall any existing
localtime and posixrules files, respectively.
The undocumented and ineffective tzsetwall function has been
removed.
|
|
|
|
zic's new -b option supports a way to control data bloat and to
test for year-2038 bugs in software that reads TZif files.
'zic -b fat' and 'zic -b slim' generate larger and smaller output;
for example, changing from fat to slim shrinks the Europe/London
file from 3648 to 1599 bytes, saving about 56%. Fat and slim
files represent the same set of timestamps and use the same TZif
format as documented in tzfile(5) and in Internet RFC 8536.
Fat format attempts to work around bugs or incompatibilities in
older software, notably software that mishandles 64-bit TZif data
or uses obsolete TZ strings like "EET-2EEST" that lack DST rules.
Slim format is more efficient and does not work around 64-bit bugs
or obsolete TZ strings. Currently zic defaults to fat format
unless you compile with -DZIC_BLOAT_DEFAULT=\"slim\"; this
out-of-the-box default is intended to change in future releases
as the buggy software often mishandles timestamps anyway.
zic no longer treats a set of rules ending in 2037 specially.
Previously, zic assumed that such a ruleset meant that future
timestamps could not be predicted, and therefore omitted a
POSIX-like TZ string in the TZif output. The old behavior is no
longer needed for current tzdata, and caused problems with newlib
when used with older tzdata (reported by David Gauchard).
zic no longer generates some artifact transitions. For example,
Europe/London no longer has a no-op transition in January 1996.
|
|
Changes to code
zic now has an -r option to limit the time range of output data.
For example, 'zic -r @1000000000' limits the output data to
timestamps starting 1000000000 seconds after the Epoch.
This helps shrink output size and can be useful for applications
not needing the full timestamp history, such as TZDIST truncation;
see Internet RFC 8536 section 5.1. (Inspired by a feature request
from Christopher Wong, helped along by bug reports from Wong and
from Tim Parenti.)
Changes to documentation
Mention Internet RFC 8536 (February 2019), which documents TZif.
tz-link.html now cites tzdata-meta
<https://tzdata-meta.timtimeonline.com/>.
|
|
Briefly:
São Tomé and Príncipe switches from +01 to +00 on 2019-01-01.
Changes to future timestamps
Due to a change in government, São Tomé and Príncipe switches back
from +01 to +00 on 2019-01-01 at 02:00. (Thanks to Vadim
Nasardinov and Michael Deckers.)
Release 2018h - 2018-12-23 17:59:32 -0800
Briefly:
Qyzylorda, Kazakhstan moved from +06 to +05 on 2018-12-21.
New zone Asia/Qostanay because Qostanay, Kazakhstan didn't move.
Metlakatla, Alaska observes PST this winter only.
Guess Morocco will continue to adjust clocks around Ramadan.
Add predictions for Iran from 2038 through 2090.
Changes to future timestamps
Guess that Morocco will continue to fall back just before and
spring forward just after Ramadan, the practice since 2012.
(Thanks to Maamar Abdelkader.) This means Morocco will observe
negative DST during Ramadan in main and vanguard formats, and in
rearguard format it stays in the +00 timezone and observes
ordinary DST in all months other than Ramadan. As before, extend
this guesswork to the year 2037. As a consequence, Morocco is
scheduled to observe three DST transitions in some Gregorian years
(e.g., 2033) due to the mismatch between the Gregorian and Islamic
calendars.
The table of exact transitions for Iranian DST has been extended.
It formerly cut off before the year 2038 in a nod to 32-bit time_t.
It now cuts off before 2091 as there is doubt about how the Persian
calendar will treat 2091. This change predicts DST transitions in
2038-9, 2042-3, and 2046-7 to occur one day later than previously
predicted. As before, post-cutoff transitions are approximated.
Changes to past and future timestamps
Qyzylorda (aka Kyzylorda) oblast in Kazakhstan moved from +06 to
+05 on 2018-12-21. This is a zone split as Qostanay (aka
Kostanay) did not switch, so create a zone Asia/Qostanay.
Metlakatla moved from Alaska to Pacific standard time on 2018-11-04.
It did not change clocks that day and remains on -08 this winter.
(Thanks to Ryan Stanley.) It will revert to the usual Alaska
rules next spring, so this change affects only timestamps
from 2018-11-04 through 2019-03-10.
Change to past timestamps
Kwajalein's 1993-08-20 transition from -12 to +12 was at 24:00,
not 00:00. I transcribed the time incorrectly from Shanks.
(Thanks to Phake Nick.)
Nauru's 1979 transition was on 02-10 at 02:00, not 05-01 at 00:00.
(Thanks to Phake Nick.)
Guam observed DST irregularly from 1959 through 1977.
(Thanks to Phake Nick.)
Hong Kong observed DST in 1941 starting 06-15 (not 04-01), then on
10-01 changed standard time to +08:30 (not +08). Its transition
back to +08 after WWII was on 1945-09-15, not the previous day.
Its 1904-10-30 change took effect at 01:00 +08 (not 00:00 LMT).
(Thanks to Phake Nick, Steve Allen, and Joseph Myers.) Also,
its 1952 fallback was on 11-02 (not 10-25).
This release contains many changes to timestamps before 1946 due
to Japanese possession or occupation of Pacific/Chuuk,
Pacific/Guam, Pacific/Kosrae, Pacific/Kwajalein, Pacific/Majuro,
Pacific/Nauru, Pacific/Palau, and Pacific/Pohnpei.
(Thanks to Phake Nick.)
Assume that the Spanish East Indies was like the Philippines and
observed American time until the end of 1844. This affects
Pacific/Chuuk, Pacific/Kosrae, Pacific/Palau, and Pacific/Pohnpei.
Changes to past tm_isdst flags
For the recent Morocco change, the tm_isdst flag should be 1 from
2018-10-27 00:00 to 2018-10-28 03:00. (Thanks to Michael Deckers.)
Give a URL to the official decree. (Thanks to Matt Johnson.)
|
|
Changes to code
When generating TZif files with leap seconds, zic no longer uses a
format that trips up older 32-bit clients, fixing a bug introduced
in 2018f. (Reported by Daniel Fischer.) Also, the zic workaround
for QTBUG-53071 now also works for TZif files with leap seconds.
The translator to rearguard format now rewrites the line
"Rule Japan 1948 1951 - Sep Sat>=8 25:00 0 S" to
"Rule Japan 1948 1951 - Sep Sun>=9 1:00 0 S".
This caters to zic before 2007 and to Oracle TZUpdater 2.2.0
and earlier. (Reported by Christos Zoulas.)
Changes to documentation
tzfile.5 has new sections on interoperability issues.
|
|
Changes to code
zic now always generates TZif files where time type 0 is used for
timestamps before the first transition. This simplifies the
reading of TZif files and should not affect behavior of existing
TZif readers because the same set of time types is used; only
their internal indexes may have changed. This affects only the
legacy zones EST5EDT, CST6CDT, MST7MDT, PST8PDT, CET, MET, and
EET, which previously used nonzero types for these timestamps.
Because of the type 0 change, zic no longer outputs a dummy
transition at time -2**59 (before the Big Bang), as clients should
no longer need this to handle historical timestamps correctly.
This reverts a change introduced in 2013d and shrinks most TZif
files by a few bytes.
zic now supports negative time-of-day in Rule and Leap lines, e.g.,
"Rule X min max - Apr lastSun -6:00 1:00 -" means the transition
occurs at 18:00 on the Saturday before the last Sunday in April.
This behavior was documented in 2018a but the code did not
entirely match the documentation.
localtime.c no longer requires at least one time type in TZif
files that lack transitions or have a POSIX-style TZ string. This
future-proofs the code against possible future extensions to the
format that would allow TZif files with POSIX-style TZ strings and
without transitions or time types.
A read-access subscript error in localtime.c has been fixed.
It could occur only in TZif files with timecnt == 0, something that
does not happen in practice now but could happen in future versions.
localtime.c no longer ignores TZif POSIX-style TZ strings that
specify only standard time. Instead, these TZ strings now
override the default time type for timestamps after the last
transition (or for all time stamps if there are no transitions),
just as DST strings specifying DST have always done.
leapseconds.awk now outputs "#updated" and "#expires" comments,
and supports leap seconds at the ends of months other than June
and December. (Inspired by suggestions from Chris Woodbury.)
Changes to documentation
New restrictions: A Rule name must start with a character that
is neither an ASCII digit nor "-" nor "+", and an unquoted name
should not use characters in the set "!$%&'()*,/:;<=>?@[\]^`{|}~".
The latter restriction makes room for future extensions (a
possibility noted by Tom Lane).
tzfile.5 now documents what time types apply before the first and
after the last transition, if any.
Documentation now uses the spelling "timezone" for a TZ setting
that determines timestamp history, and "time zone" for a
geographic region currently sharing the same standard time.
The name "TZif" is now used for the tz binary data format.
tz-link.htm now mentions the A0 TimeZone Migration utilities.
(Thanks to Aldrin Martoq for the link.)
|
|
Changes to code
zic now accepts subsecond precision in expressions like
00:19:32.13, which is approximately the legal time of the
Netherlands from 1835 to 1937. However, because it is
questionable whether the few recorded uses of non-integer offsets
had subsecond precision in practice, there are no plans for tzdata
to use this feature. (Thanks to Steve Allen for pointing out
the limitations of historical data in this area.)
The code is a bit more portable to MS-Windows. Installers can
compile with -DRESERVE_STD_EXT_IDS on MS-Windows platforms that
reserve identifiers like 'localtime'. (Thanks to Manuela
Friedrich).
Changes to documentation and commentary
theory.html now outlines tzdb's extensions to POSIX's model for
civil time, and has a section "POSIX features no longer needed"
that lists POSIX API components that are now vestigial.
(From suggestions by Steve Summit.) It also better distinguishes
time zones from tz regions. (From a suggestion by Guy Harris.)
Commentary is now more consistent about using the phrase "daylight
saving time", to match the C name tm_isdst. Daylight saving time
need not occur in summer, and need not have a positive offset from
standard time.
Commentary about historical transitions in Uruguay has been expanded
with links to many relevant legal documents.
(Thanks to Tim Parenti.)
Commentary now uses some non-ASCII characters with Unicode value
less than U+0100, as they can be useful and should work even with
older editors such as XEmacs.
|
|
Release 2018c - 2018-01-22 23:00:44 -0800
Changes to build procedure
The build procedure now works around mawk 1.3.3's lack of support
for character class expressions. (Problem reported by Ohyama.)
Release 2018b - 2018-01-17 23:24:48 -0800
Changes to build procedure
The distribution now contains the file 'pacificnew' again.
This file was inadvertantly omitted in the 2018a distribution.
(Problem reported by Matias Fonzo.)
Release 2018a - 2018-01-12 22:29:21 -0800
Changes to build procedure
The default installation locations have been changed to mostly
match Debian circa 2017, instead of being designed as an add-on to
4.3BSD circa 1986. This affects the Makefile macros TOPDIR,
TZDIR, MANDIR, and LIBDIR. New Makefile macros TZDEFAULT, USRDIR,
USRSHAREDIR, BINDIR, ZDUMPDIR, and ZICDIR let installers tailor
locations more precisely. (This responds to suggestions from
Brian Inglis and from Steve Summit.)
The default installation procedure no longer creates the
backward-compatibility link US/Pacific-New, which causes
confusion during user setup (e.g., see Debian bug 815200).
Use 'make BACKWARD="backward pacificnew"' to create the link
anyway, for now. Eventually we plan to remove the link entirely.
tzdata.zi now contains a version-number comment.
(Suggested by Tom Lane.)
The Makefile now quotes values like BACKWARD more carefully when
passing them to the shell. (Problem reported by Zefram.)
Builders no longer need to specify -DHAVE_SNPRINTF on platforms
that have snprintf and use pre-C99 compilers. (Problem reported
by Jon Skeet.)
Changes to code
zic has a new option -t FILE that specifies the location of the
file that determines local time when TZ is unset. The default for
this location can be configured via the new TZDEFAULT makefile
macro, which defaults to /etc/localtime.
Diagnostics and commentary now distinguish UT from UTC more
carefully; see theory.html for more information about UT vs UTC.
zic has been ported to GCC 8's -Wstringop-truncation option.
(Problem reported by Martin Sebor.)
Changes to documentation and commentary
The zic man page now documents the longstanding behavior that
times and years can be out of the usual range, with negative times
counting backwards from midnight and with year 0 preceding year 1.
(Problem reported by Michael Deckers.)
The theory.html file now mentions the POSIX limit of six chars
per abbreviation, and lists alphabetic abbreviations used.
The files tz-art.htm and tz-link.htm have been renamed to
tz-art.html and tz-link.html, respectively, for consistency with
other file names and to simplify web server configuration.
|
|
zic and the reference runtime now reject multiple leap seconds
within 28 days of each other, or leap seconds before the Epoch.
As a result, support for double leap seconds, which was
obsolescent and undocumented, has been removed. Double leap
seconds were an error in the C89 standard; they have never existed
in civil timekeeping. (Thanks to Robert Elz and Bradley White for
noticing glitches in the code that uncovered this problem.)
zic now warns about use of the obsolescent and undocumented -y
option, and about use of the obsolescent TYPE field of Rule lines.
zic now allows unambiguous abbreviations like "Sa" and "Su" for
weekdays; formerly it rejected them due to a bug. Conversely, zic
no longer considers non-prefixes to be abbreviations; for example,
it no longer accepts "lF" as an abbreviation for "lastFriday".
Also, zic warns about the undocumented usage with a "last-"
prefix, e.g., "last-Fri".
Similarly, zic now accepts the unambiguous abbreviation "L" for
"Link" in ordinary context and for "Leap" in leap-second context.
Conversely, zic no longer accepts non-prefixes such as "La" as
abbreviations for words like "Leap".
zic no longer accepts leap second lines in ordinary input, or
ordinary lines in leap second input. Formerly, zic sometimes
warned about this undocumented usage and handled it incorrectly.
The new macro HAVE_TZNAME governs whether the tzname external
variable is exported, instead of USG_COMPAT. USG_COMPAT now
governs only the external variables "timezone" and "daylight".
This change is needed because the three variables are not in the
same category: although POSIX requires tzname, it specifies the
other two variables as optional. Also, USG_COMPAT is now 1 or 0:
if not defined, the code attempts to guess it from other macros.
localtime.c and difftime.c no longer require stdio.h, and .c files
other than zic.c no longer require sys/wait.h.
zdump.c no longer assumes snprintf. (Reported by Jonathan Leffler.)
Calculation of time_t extrema works around a bug in GCC 4.8.4
(Reported by Stan Shebs and Joseph Myers.)
zic.c no longer mistranslates formats of line numbers in non-English
locales. (Problem reported by Benno Schulenberg.)
Several minor changes have been made to the code to make it a
bit easier to port to MS-Windows and Solaris. (Thanks to Kees
Dekker for reporting the problems.)
Changes to documentation and commentary
The two new files 'theory.html' and 'calendars' contain the
contents of the removed file 'Theory'. The goal is to document
tzdb theory more accessibly.
The zic man page now documents abbreviation rules.
tz-link.htm now covers how to apply tzdata changes to clients.
(Thanks to Jorge Fábregas for the AIX link.) It also mentions MySQL.
The leap-seconds.list URL has been updated to something that is
more reliable for tzdb. (Thanks to Tim Parenti and Brian Inglis.)
|
|
|
|
|
|
|
|
|