summaryrefslogtreecommitdiff
path: root/sys/dev/i2c/i2c_bitbang.c
blob: 5e39403a4c521742941e06041dffd46c087a8fb9 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
/*	$NetBSD: i2c_bitbang.c,v 1.14 2016/06/07 01:06:27 pgoyette Exp $	*/

/*
 * Copyright (c) 2003 Wasabi Systems, Inc.
 * All rights reserved.
 *
 * Written by Jason R. Thorpe for Wasabi Systems, Inc.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *      This product includes software developed for the NetBSD Project by
 *      Wasabi Systems, Inc.
 * 4. The name of Wasabi Systems, Inc. may not be used to endorse
 *    or promote products derived from this software without specific prior
 *    written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL WASABI SYSTEMS, INC
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

/*
 * Common module for bit-bang'ing an I2C bus.
 */

#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: i2c_bitbang.c,v 1.14 2016/06/07 01:06:27 pgoyette Exp $");

#include <sys/module.h>
#include <sys/param.h>

#include <dev/i2c/i2cvar.h>
#include <dev/i2c/i2c_bitbang.h>

#define	SETBITS(x)	ops->ibo_set_bits(v, (x))
#define	DIR(x)		ops->ibo_set_dir(v, (x))
#define	READ		ops->ibo_read_bits(v)

#define	SDA		ops->ibo_bits[I2C_BIT_SDA]	/* i2c signal */
#define	SCL		ops->ibo_bits[I2C_BIT_SCL]	/* i2c signal */
#define	OUTPUT		ops->ibo_bits[I2C_BIT_OUTPUT]	/* SDA is output */
#define	INPUT		ops->ibo_bits[I2C_BIT_INPUT]	/* SDA is input */

#ifndef SCL_BAIL_COUNT
#define SCL_BAIL_COUNT 1000
#endif

static inline int i2c_wait_for_scl(void *, i2c_bitbang_ops_t);

static inline int
i2c_wait_for_scl(void *v, i2c_bitbang_ops_t ops)
{
	int bail = 0;

	while (((READ & SCL) == 0) && (bail < SCL_BAIL_COUNT)) {
		delay(1);
		bail++;
	}
	if (bail == SCL_BAIL_COUNT) {
		i2c_bitbang_send_stop(v, 0, ops);
		return EIO;
	}
	return 0;
}

/*ARGSUSED*/
int
i2c_bitbang_send_start(void *v, int flags, i2c_bitbang_ops_t ops)
{

	/* start condition: put SDA H->L edge during SCL=H */

	DIR(OUTPUT);
	SETBITS(SDA | SCL);
	delay(5);		/* bus free time (4.7 us) */
	SETBITS(  0 | SCL);
	if (i2c_wait_for_scl(v, ops) != 0)
		return EIO;
	delay(4);		/* start hold time (4.0 us) */

	/* leave SCL=L and SDA=L to avoid unexpected start/stop condition */
	SETBITS(  0 |   0);

	return 0;
}

/*ARGSUSED*/
int
i2c_bitbang_send_stop(void *v, int flags, i2c_bitbang_ops_t ops)
{

	/* stop condition: put SDA L->H edge during SCL=H */

	/* assume SCL=L, SDA=L here */
	DIR(OUTPUT);
	SETBITS(  0 | SCL);
	delay(4);		/* stop setup time (4.0 us) */
	SETBITS(SDA | SCL);

	return 0;
}

int
i2c_bitbang_initiate_xfer(void *v, i2c_addr_t addr, int flags,
    i2c_bitbang_ops_t ops)
{

	if (addr < 0x80) {
		uint8_t i2caddr;

		/* disallow the 10-bit address prefix */
		if ((addr & 0x78) == 0x78)
			return EINVAL;
		i2caddr = (addr << 1) | ((flags & I2C_F_READ) ? 1 : 0);
		(void) i2c_bitbang_send_start(v, flags, ops);

		return (i2c_bitbang_write_byte(v, i2caddr,
			    flags & ~I2C_F_STOP, ops));

	} else if (addr < 0x400) {
		uint16_t	i2caddr;
		int		rv;

		i2caddr = (addr << 1) | ((flags & I2C_F_READ) ? 1 : 0) |
		    0xf000;

		(void) i2c_bitbang_send_start(v, flags, ops);
		rv = i2c_bitbang_write_byte(v, i2caddr >> 8,
		    flags & ~I2C_F_STOP, ops);
		/* did a slave ack the 10-bit prefix? */
		if (rv != 0)
			return rv;

		/* send the lower 7-bits (+ read/write mode) */
		return (i2c_bitbang_write_byte(v, i2caddr & 0xff,
			    flags & ~I2C_F_STOP, ops));

	} else
		return EINVAL;
}

int
i2c_bitbang_read_byte(void *v, uint8_t *valp, int flags, i2c_bitbang_ops_t ops)
{
	int i;
	uint8_t val = 0;
	uint32_t bit;

	/* assume SCL=L, SDA=L here */

	DIR(INPUT);

	for (i = 0; i < 8; i++) {
		val <<= 1;

		/* data is set at SCL H->L edge */
		/* SDA is set here because DIR() is INPUT */
		SETBITS(SDA |   0);
		delay(5);	/* clock low time (4.7 us) */

		/* read data at SCL L->H edge */
		SETBITS(SDA | SCL);
		if (i2c_wait_for_scl(v, ops) != 0)
			return EIO;
		if (READ & SDA)
			val |= 1;
		delay(4);	/* clock high time (4.0 us) */
	}
	/* set SCL H->L before set SDA direction OUTPUT */
	SETBITS(SDA |   0);

	/* set ack after SCL H->L edge */
	bit = (flags & I2C_F_LAST) ? SDA : 0;
	DIR(OUTPUT);
	SETBITS(bit |   0);
	delay(5);	/* clock low time (4.7 us) */

	/* ack is checked at SCL L->H edge */
	SETBITS(bit | SCL);
	if (i2c_wait_for_scl(v, ops) != 0)
		return EIO;
	delay(4);	/* clock high time (4.0 us) */

	/* set SCL H->L for next data; don't change SDA here */
	SETBITS(bit |   0);

	/* leave SCL=L and SDA=L to avoid unexpected start/stop condition */
	SETBITS(  0 |   0);


	if ((flags & (I2C_F_STOP | I2C_F_LAST)) == (I2C_F_STOP | I2C_F_LAST))
		(void) i2c_bitbang_send_stop(v, flags, ops);

	*valp = val;
	return 0;
}

int
i2c_bitbang_write_byte(void *v, uint8_t val, int flags, i2c_bitbang_ops_t ops)
{
	uint32_t bit;
	uint8_t mask;
	int error;

	/* assume at SCL=L, SDA=L here */

	DIR(OUTPUT);

	for (mask = 0x80; mask != 0; mask >>= 1) {
		bit = (val & mask) ? SDA : 0;

		/* set data after SCL H->L edge */
		SETBITS(bit |   0);
		delay(5);	/* clock low time (4.7 us) */

		/* data is fetched at SCL L->H edge */
		SETBITS(bit | SCL);
		if (i2c_wait_for_scl(v, ops))
			return EIO;
		delay(4);	/* clock high time (4.0 us) */

		/* put SCL H->L edge; don't change SDA here */
		SETBITS(bit |   0);
	}

	/* ack is set at H->L edge */
	DIR(INPUT);
	delay(5);	/* clock low time (4.7 us) */

	/* read ack at L->H edge */
	/* SDA is set here because DIR() is INPUT */
	SETBITS(SDA | SCL);
	if (i2c_wait_for_scl(v, ops) != 0)
		return EIO;
	error = (READ & SDA) ? EIO : 0;
	delay(4);	/* clock high time (4.0 us) */

	/* set SCL H->L before set SDA direction OUTPUT */
	SETBITS(SDA |   0);
	DIR(OUTPUT);
	/* leave SCL=L and SDA=L to avoid unexpected start/stop condition */
	SETBITS(  0 |   0);

	if (flags & I2C_F_STOP)
		(void) i2c_bitbang_send_stop(v, flags, ops);

	return error;
}

MODULE(MODULE_CLASS_MISC, i2c_bitbang, NULL);

static int      
i2c_bitbang_modcmd(modcmd_t cmd, void *opaque)
{                       
 
	switch (cmd) {  
	case MODULE_CMD_INIT:
		return 0;
	case MODULE_CMD_FINI:
		return 0;
	default:
		return ENOTTY;
	}
}